|
 H
& H Hi-Deck series trailer
Return to
Flatbed trailer page
Features
|
|
Standard dual LED tail lights. These are the same
superior quality lights found in our H&H Cargo trailers with 100,000
hour service life ratings and all the advantages only an LED light can
give you. |
These round LED marker lights are also standard as is the
class III receiver hitch, safety chain tangs and 7 spade RV plug
(truck end) pre-wired for towing a smaller trailer behind your gooseneck for
transfer to work sites. Just order any H&H Hi-Deck© series flat deck
trailer with a dovetail and you get the trailer tow pack standard. |
Our exclusive convertible dovetail is always 5’ long and is added when you
order a trailer. In other words, if you want a 30’ trailer including the
dovetail, you simply order a Hi-Deck© series flat deck in 25 foot deck
length and add the dovetail. |
And this is why it’s called a convertible dovetail! By using a pull out
actuator, you simply lever the tail up and lock it in the upright
position. You can view our test our unit in action by clicking the links
below. |
This unit comes standard with a 19lb per foot 12" I-beam main frame,
3" channel crossmembers on 16" spacings and hefty 6"
channel steel rub rails with stake pockets every 16" inside. It makes
for a smooth, solid stout chassis indeed.
|
Also standard on all H&H Hi-Deck© series flat deck trailers are these
side marker lights. Full LED once again and shielded in steel casings, you
won’t believe how bright these are until you see them at night.
Impressive and durable lighting with all wiring inside of full PVC conduit
is standard on all of these models. |
Standard on all heavy framed Hi-Deck© series flat deck trailers are these
dual 12,000lb rated drop leg jacks with spring loaded retractors. Once
again, you have to see how easy they are to operate to fully appreciate
them. The lighter duty 14lb frame model comes with one of these standard. |
Another freebie on all models is this diamond plate steel chain tray
hidden between the uprights of the tongue. It goes back under the trailer
about 18" to give you a huge storage area for chains, wood blocks or
whatever. Price? FREE!
|
On both sides, you’ll also find two custom formed diamond plate steel
steps and a matching grab handle at the top of the hitches uprights. Just
grab the handle and step up on the bed from either side... all std.
|
|
Standard on all H&H Hi-Deck© series flat deck trailers… a massive
12" I-Beam neck with lower cargo stop bar. A spare wheel (no tire)
and mount are also standard on all models, hidden up inside the neck.
|
|
When you order an H&H Hi-Deck© series flat deck with the optional
20,000lb tandem dual axle option, we install the wide spread axle setting
standard. It lets the trailer ride a little smoother, spreads the load a
little better and actually cuts down on oscillations to the tow vehicle
when hopping over expansion strips on the highways.
Cool looking silver powder coat wheels and low profile
245/75 16 radial tires come with this option package.
|
|
Another standard on all H&H Hi-Deck© series flat deck trailers are
rubber mud flaps. Whether you order a standard 14,000lb rated model or a
tandem dual model, these mud flaps come pre-installed.
|
When you add a dovetail to any Hi-Deck© series flat deck, a pair of these
heavy duty docklegs are included at no extra charge. To operate them,
simply tug the tipper latch (arrow)….
|
As with all H&H Hi-Deck© series flat deck trailers, this unit comes
with a full 12" I-beam frame, 3" channel crossmembers on
16" centers and outriggers down to the frame for extra support. Add
to this the heavier 19lb per foot rating of the heavy frame version and
the taller, thicker 6" channel steel side rub rails and you have the
equivalent of an 18" tall frame for supporting your loads.
|
